This 100W?monocrystalline?solar panel with its high power output and the robust design the right solution for a stand-alone system. Even on cloudy days, the solar panel delivers a high energy yield. The panel is covered by a special tempered glass to protect against environmental conditions such as hail, snow, and ice. The panel frame made of anodized aluminum ensures stability.
1 pc?1000W?Grid Tie Power Inverter
1 pair?5 meters?12AWG (4mm2)?Extension Solar?Cable?with MC4?Quick?Connector
4?pairs??Y MC4 PV?Solar?Cable?Branch?Connector
100W Monocrystalline Solar Panel
- Easy installation with pre-drilled hole.
- By-Pass diode minimized the impact of shade.
- Waterproof IP-65 rated junction box: advanced water and dustproof level (complete protection against environmental particles and low-pressure water jets)
- Resistance to salt corrosion and humidity.
- Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades as well as withstand high winds (2400Pa) and snow loads (5400Pa).
- Lightweight anodized aluminum frame and reinforced safety and anti-reflection coated glass 3.2mm thick (tempered + patterned).
||1010mm*510mm*35 mm£¨39.8*20.1*1.4 In£©
?1000W Grid Tie Solar Power Inverter on Grid MPPT / Limiter DC 22V-65V
The grid-tie power inverter is the most efficiency and technologically advanced inverter for the solar power system.
- Low cost and easy installation: it can make full use of all types of buildings¡¯ surface that face to the sun in the city as well as the fast and easy installation of solar modules and grid-tie inverter. It just needs very low maintenance costs
- Free combination: it can be used as a separate grid tie system and can be set up as a large solar array with many of them.
- Improving the efficiency of the entire solar power system: Because of the MPPT function. So every panel is working at the maximum.
- Low power consumption.
Installing grid tie power system involves several key steps:
- Considering the total capacity of the grid-tie power system that you need.
- Choosing applicable solar panels for the grid-tie inverter.
- Selecting accessory for installation of the grid-tie power system.
- Selecting the correct model of the grid-tie inverter.
- Installing solar panels to a suitable place.
- Installing grid tie inverter to a suitable place.
- Connecting the grid-tie power system with cables and connectors.
- Grounding the system.
- Completing the installation map and connecting the PV modules.
|Rated Power (Peak/Continuous)
||1000W / 900W
|DC Input Voltage
|AC Output Voltage Range
|AC Output Frequency Range
|Peak Inverter Efficiency
|Night Power Consumption
|Over Current Protection
|Over Temperature Protection
|Reverse Polarity Protection
|Operating Temperature Range
|Storage Temperature Range
5-Meter 4mm2 Extension Solar Cable with MC4 Connector
- Widely used in the underground, In electrical installation pipes, On, inside, and under the plaster, In electrical installation ducts, In equipment.
|Net cable weight. Approximate
|Min bending radius
|Max. permissible tensile load
|Max. current load at 60¡æ
|Permitted short-circuit current(1 sec)
Y Branch Connector with Cable
- This branch connector with male/female Connectors for connecting 8pcs solar panel for charging 24V battery.
- Simple, quick installation.
- With excellent aging resistance and UV endurance.
- Compatible with MC4 solar connector.
- Created seal, design of waterproof and dustproof.
- The eligible plastic material has marvelous performances of high low temperature, fireproof, anti- Ultraviolet rays and applied to the long-time operation outside.
- Lightweight only: 0.6kg.
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
As you find the product is carrier damage or defective, please do as the following step and contact us in time, we can offer re-sent or refund service as your requirement. The return process is simple. If you have any questions, please send an e-mail to email@example.com.
First: Complaint to the logistic company (UPS, FedEx, DHL, DPD, ext), keep the goods in original package in case the logistic company (UPS, FedEx, DHL, DPD, ext) need to inspect it at your place.
Second: To complete your return, we require a receipt or proof of purchase. Please send us 5 pictures for the product, it is claimed compensation from the logistic company.
1. The whole front side of the whole product.
2. Broken details for items.
3. Broken packages with foam.
4. Broken carton with the clear shipping label and tracking number.
5. Clear shipping label with the tracking number.
There are certain situations where only partial refunds are granted (if applicable)
- Any item not in its original condition is damaged or missing parts for reasons not due to our error
- Any item that is returned more than 30 days after delivery
ECO-WORTHY has stock in several countries. All orders can be delivered to worldwide, All "Economy Int'l Shipping" orders will ship using Singapore post, HK post or EMS, FedEx post, etc. The little package will be our choice of Singapore post, HK post, etc. Big package order will be our choice of FedEx, DHL, UPS, DPD, etc. All orders for items that we have in stock will be shipped within 24-48 hours. If you are on a tight deadline and require expedited shipping, we suggest you contact us firstname.lastname@example.org to confirm the items are in stock and we can ship your order. All of our shipping options are calculated automatically in your shopping cart based on your address. you can estimate your shipping cost in shopping cart quickly and need not to login in.