Bryce, I have the 5000w inverter with 3x51.2 battery's in paralel , the manual is very confusing and there is no adequate information wich type the battery's are. LFP16, 15 or 14? When the battery...

I was wondering what the minimum wattage is for the Sun tracking frames Eco-Worthy makes?  I have a shallow well that works fairly well on a 200w, 36v RPS Solar system and am in the process of...

Hi to all, I've an hybrid inverter labeled "SM-3200H-24" with 6 panel Jinko 410W each, and 3 Eco Worthy Batteries 25.6V 100Ah (paralleled). I think that the current battery charging parameters are...

The manual says there is a windows usb driver, and there is software that uses the rs485 protocol to monitor and log performance. I can't find either. can someone help me?

@Christian Smith   Thank You your ideas  worked great!!  I am back up and viewing of the app  John

I got an ECO Worthy 60amp charge controller replacement and connected it to my existing BT-02. I have tried EVERYTHING I can think of to get it working, but it won't connect to the new controller. ...

Ok, I have now used the inverter coupled to both the controller load output and direct to the battery. In both cases the charge controller does the following: does not charge the battery beyond 1...

Hi, Are your All-In-One units high-frequency or low-frequency inverters? Wade

Thanks B, appreciate it

I just installed a 60 amp charge controller with 4 195 watt panels wired in paralell, and using 12 volt batteries. Yesterday, the controller was charging at about 28 amps and every 8 - 10 minutes o...

We're in the process of building a new home and want to add a solar system with battery back to the home. I'm trying to keep it under $5000 and to supply 240v. What else would I need to have this ...

Hi, our new MH came with a 120W panel and i wanted to increase this. Is this a simple addition or do the panels need to match?

Ok, cheers.

@Stuart Littlewood Could you tell me the order number of the monitor? You could refer to the manual to learn how to setup.

@roop fisher Hi, the inverter should be connected to battery, not the load output of the charge controller. Yes turn off the charge controller before hooking them up and putting the inverter on/und...

@Will Merwin Did you buy the 25w solar panel along with the 10A controller? What size battery do you have?

@Casey Hanner If you're fine with writing your own code, look on github for libmodbus.  If you're running Linux, you should be able to install it from packages.  The function modbus_read_...

I have just changed to Virgin media in uk . Same problem  Contact your supplier and ask them to set up a 2.4 signal for you .I did and all works fine Now 

How do you enter the parameters to my monitor 

My wife  changed internet providers to optimum  to 5 g   I lost my wifi to my 5000 inverter  inverter  any work arounds so i can motor my system?   is there ...