I am a novis to all of this, I bought a Eco worthy solar pump kit las year with a 120 whatt solar pannel and a 10Wh battery . I is only used once a year a a camp foe showers. The pump will run for ...

@John Neff if Eco-worthy took themself serious, they publish a llist of setting for the inverter and the eco-worthy battery's. The manual is insufficient to make the good settings.    &...

@Sam Carpenter same problems, did you get an answer?

That’s good! I like it. And thanks for sharing. 

At the moment I hope to find a decent browser color picker. Need it for design purposes. Share some if you can.

I wondering if someone has experimented eco-worthy lifepo4 battery with electric marine outboard.  I'm referring to auxiliary outboard engine like ones for trolling. regards Vincenzo  

Bryce, I have the 5000w inverter with 3x51.2 battery's in paralel , the manual is very confusing and there is no adequate information wich type the battery's are. LFP16, 15 or 14? When the battery...

I was wondering what the minimum wattage is for the Sun tracking frames Eco-Worthy makes?  I have a shallow well that works fairly well on a 200w, 36v RPS Solar system and am in the process of...

Hi to all, I've an hybrid inverter labeled "SM-3200H-24" with 6 panel Jinko 410W each, and 3 Eco Worthy Batteries 25.6V 100Ah (paralleled). I think that the current battery charging parameters are...

The manual says there is a windows usb driver, and there is software that uses the rs485 protocol to monitor and log performance. I can't find either. can someone help me?

@Christian Smith   Thank You your ideas  worked great!!  I am back up and viewing of the app  John

I got an ECO Worthy 60amp charge controller replacement and connected it to my existing BT-02. I have tried EVERYTHING I can think of to get it working, but it won't connect to the new controller. ...

Ok, I have now used the inverter coupled to both the controller load output and direct to the battery. In both cases the charge controller does the following: does not charge the battery beyond 1...

Hi, Are your All-In-One units high-frequency or low-frequency inverters? Wade

Thanks B, appreciate it

I just installed a 60 amp charge controller with 4 195 watt panels wired in paralell, and using 12 volt batteries. Yesterday, the controller was charging at about 28 amps and every 8 - 10 minutes o...

We're in the process of building a new home and want to add a solar system with battery back to the home. I'm trying to keep it under $5000 and to supply 240v. What else would I need to have this ...

Hi, our new MH came with a 120W panel and i wanted to increase this. Is this a simple addition or do the panels need to match?

Ok, cheers.

@Stuart Littlewood Could you tell me the order number of the monitor? You could refer to the manual to learn how to setup.