LiFePo4 12.8v 100

• DL

  Das Legat

  6/11/25, 9:18 PM

  Hi,

  I got 2 problems with this Batterie. First I use this batterie in an older Camper. The charger of the car can easily charge the batterie but I think it "overcharges".  One time I got a voltage of 3.5Volt each Cell. This should be way to hoch as I think 3.4 ist the maximum it should be. Shouldn't the BMS shut off the charging at some point? Can someone give me an advise on this?

   

  and: The app (and BMS) don't geht when I discharge the batterie under 10watts. I see the voltage drain, but the SoC say it's still 100%.

   

  anyway I can update the BMs?

   

   

  0 likes 0 likes Liked Like

  ---

  2
  Posts

  180
  Views

  Reply

  ---

• DL

  Das Legat

  6/12/25, 9:41 PM

  @Eric Hevan 

   

  hey u where absolutely right... I think there is a typo in the BMS Programming checkt it and it says 100% charged 3350mV

  but the Full cell ist set to 3550mV...
  im going to fix this but also contact eco-Worthy cause that's just dangerous...

   

  thx mate

  0 likes 0 likes Liked Like

  ---