Hi,
I've had my system installed for a bit. I have 2 of the 10000 watt inverters with a rack of the 6 rack mount batteries.
After I got everything working, I'm having an issue where on peak rates I want it to run off the battery only. It's still using grid power also, see the picture. Is there something I need to change?
hey man Daniel Wilkie Looks like your battery is discharging at 4.98 kW, but the house is using 5.17 kW, so the grid is supplying the remaining load. I’d check the inverter’s discharge settings and whether both inverters are configured to prioritise battery power during peak rates. Is there a minimum battery reserve or grid-assist setting enabled in your inverter wahht?
