It’s winter where I live I will be installing in the spring weather permitting

Would put them all over the house if I had the money

I received two 195W 12V panels to replace my three year old 160W panels. With just little effort, I was able to drop the new panel as the size was of the Eco-Worthy panels we almost the exact size as the old panels. I templated the mounting holes from the existing panels and drilled through the sturdy new panels. From there, it was an easy process placing them on my existing sailboat arch. I realized an additional 70 watts of power in the same footprint! Excellent price for the value!

I live in Central Oregon and purchased 8 100w Eco-Worthy panels. 4 standard and 4 bi-facial. It is 12/05/24 12:10 pm. 35 degrees outside. I live at 4300 foot elevation. I just checked the output of my panels. They are producing well over 800w. 835w on the first reading and the second reading was 817. We only get a couple hours of full sunshine at this time of year. I set up a small solar system to help during extended power outages. I could not be more thrilled with my purchase.

Been using it for about a week now. Works great, just as advertised.

I placed the order and received it a few days ago, on time and in good condition. Battery has taken a charge and seems to function fine. No testing done as far as whether it meets advertised parameters, so we’ll see.

I will be installing in the spring but I’m looking forward to hooking up And I will be adding to my battery bank

I bought 4 panels for my camper, to charge a 2kw Bluetti power bank, I can hope that the new panels will be installed on my 20 year old hybrid array since the old panels are shot, I'm toying with a slightly different configuration because the batteries drop so low by daybreak I'm hoping to capture the eastern sun but I keep seeing a sawtooth setup in Europe that's intriguing.

The whole transaction went as promised. I was quite relieved. I would do it again!!.

Very solid charge controller! I have been using mine for close to 2 years now without any issues at all!

I can’t believe how well this kit works! I got it for my camper van but soon realized how much money it could save on the bills using something like this and am starting to spend a lot more time thinking about ways to save money and be more eco friendly around the house and I’m looking into buying a larger system for my house. Thanks for making solar make sense and available to the regular Joe like myself! I’d much rather buy a system from you and own it than get myself involved in one of the programs here in California because with this I don’t need public utilities at all and the equipment is mine!!

40A MPPT OLED Display Solar Charge Controller Regulator 12V/24V Autoswitch

Had a some shipping damage to package but panels were fine. Hooked up and tested volts and amp output. Measured spot on to data sheet. I have ordered a second one to combine with the first one. Have two Eco Worthy batteries ordered.

I do love my trackers. They work well. I have made some modifications to ensure safety and stability.

1) I'm in Michigan where it gets under 0F degrees in the winter. So, charging batteries outside was not an option. Using an power AC to DC power supply connected to my inverter and run a line at 48v to a DC-DC converter at the tracker to step down to 12v - Works well in my use case.
2) I purchased 3 heavily reinforced Unistrut and used them to mount my panels in a standard 8 panel configuration (200w 10BB bifacials) - The Unistrut included is not the heavy stuff, so it bends easy.
3) I mounted everything into a metal junction box because of weather here; I had my first controller die (screen couldn't handle the windchill here)
4) flip the actuator mounting bracket that connects to the upper swing bar for East/West, so the west tilt does not go vertical. My Actuator literally snapped. This is a major design flaw. So, watch it.. not safe.
5) Added Bushings to the east/west lower mount point that connects to the N/S arm. This is important per number 4, when the actuator broke, it's only surface mounted and bent the metal it was mounted too. A simple through bolt and bushing salved this.
6) Because of number 4, I replaced my actuators with more heavy-duty ones from Progressive Automation. Eco-Worthy. Please at least provide an option for us to purchase more heavy-duty actuators. The ones included are iffy at best.

Eco-Worthy.. Please consider better actuators, maybe an upgrade kit that allows more panels that has re-enforced Unistrut as in my photos, heavy-duty actuators, and please re-enforce the lower North/South arm where the East/West actuator attaches with through bolts and bushings. plastic insert bushings would be fine... anything other than surface mounting there would be great!

Great service.