•
1 11

ECO-WORTHY Solar Panel Dual Axis Tracking System (Expanded Version Increase 40% Power) with Tracker Controller

ECO-WORTHY Solar Panel Dual Axis Tracking System (Expanded Version Increase 40% Power) with Tracker Controller

$589.99
$589.99 $799.99
save 26% Sold out
Shipping calculated at checkout.

SKU: US-L03TGSF12-SCB1-1A

Intelligent tracking, increase efficiency by 40% High-precision light sensor monitors the light intensity in real time and intelligently adjusts the angle of the solar panel, which improves the power generation efficiency by 40% compared with the ordinary bracket.
Accurate light tracking, extend time Dual-axis drive + sensitive sensors, realizing 270°accurate tracking of the sun, capturing every beam of light, and improving the efficiency of energy conversion.
Intelligent adaptation to extreme weather Wind speed over 17.2m/s automatic leveling (adjustable), support manual adjustment of bracket direction, intelligent snow removal in snowy days.
Save 90% installation space Occupies only 0.0484m², saves 90% space compared with traditional bracket, suitable for small yards/farms.
Reliable service and lifelong technical support ECO-WORTHY provides one-on-one customer service and lifetime technical support to answer your questions at any time.
Learn More See Less
Style
View full details
Description Specification Downloads Shipping&Return

FAQ

Q1: How to fix the base of main pole? (foundation length, width and depth)

A1: The main pole must be installed on solid concrete ground or pier with the expansion bolts.The solid ground base must be larger or equal to 600*600*700mm cube.Recommend concrete material (kg/m³):Cement(450kg)+Water(183kg)+Sand(600kg)+Gravel (1,192kg)

Q2: Distance between multiple sets of solar tracker?

A2:4.5m(14.8FT) or more

Q3: Light sensor installation position and direction?

A3:The outlet of the light sensor should always face south, and it is recommended to install it at the end of the first C-shaped steel on the east side

Q4: Installation position of "East-West"linear actuator?

A4:Towards the west side

Q5: What should I do if I encounter problems with the installation?

A5:Please let us know ,we will reply your email in 12h on weekdays

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Marc
Excellent Solar Tracing System

Everything was well labeled and directions were easy to follow. Watched a few video's before starting and decided to make a few mods.

Poured a slab with small footer and pipe in center for wires. Drilled hole in base of tracker to run wires up through the stand. I used 2 inch longer concrete anchors than what was in the package.

Drilled a hole just below where the controller was to be mounted to bring the wires that I ran back out of the stand. This included a ground wire, solar wires and power wires. I then used a waterproof box to mount the controller and wiring.

I trimmed down all the solar mounting metal so that my panels would fit with no metal extending out. I really liked their panel mounting hardware as it mounts from underneath leaving a very clean look.

Connected power wires to a 24V-13V Stepdown Converter instead of using a separate panel and battery. Changed a couple of settings on the controller and had to switch the North and South wires, but all the cables were easy with waterproof connectors already installed.

Works great and definitely increased my solar wattage by approximately by 35%. Heavy duty, well built and works well. A little work, but installed with no assistance.

User picture User picture User picture
J
John S.
I like the dual solar tracker

I like the dual solar tracker and how it was extended. Going to tie into EcoFlow Delta Pro Ultra to charge the Ultra batteries. I see the extended version can hold 4 400watt panels. What 400 watt panels will work? Trying to buy all I need to hook it up to the Delta Pro Ultra.