ECO-WORTHY 5.12KWh/10.24KWh Home Backup Power With 48V 100Ah LiFePO4 And 5000W 48V Hybrid Inverter

60A 12/24/36/48V MPPT OLED Display Solar Charge Controller Regulator

Just finished installing two solar trackers. Each base is 3.5 feet deep and 12 inches in diameter. I skipped the kit's anchors and used 10-inch concrete hook bolts, set during the pour. Each tracker holds four 410W bifacial panels. Temporary lines are connected to an EcoFlow Delta Pro Ultra with a 28kW battery. I’ll check production tomorrow. The trackers seem sturdy, with stainless steel bolts. However, the instructions are off: the east-west pivot piece is shown one way initially but correctly flipped in step 3. Overall, solid trackers.

Everything was provided, no missing parts, easy instructions, I have to admit I don't understand the middle leg, seems as if it would make the angle easily adjustable, but.... As I said I don't understand. Anyway affordable, easily assembled works great with my 4 195 bifacial panels! I recommend.

After purchasing rural property in Maine, we discovered that bringing power in from the nearest pole was going to cost over $100,000!! So we decided to go with a solar inverter/batteries. We now needed something to charge said batteries.....we have 4-400w bifacial panels that weigh about 49lbs each. The dual axis tracker has been an absolute game changer in providing the daily charge we need! The tracker had performed flawlessly with one small exception...the wind turbine. The tracker doesn't seem to recognize the wind speed to flatten out....I have to call customer support and troubleshoot. We lo e the tracker so much, we purchased a second one to install later this summer!

Replacement for my dual axis tracker sunlight sensor and all is good again.

Thank you

5A & 10A 12V Smart Battery Charger with LCD Display for Lithium (LiFePO4) Batteries

needed some small panels to run water pumps- these are perfect

LiFePO4 12V 100Ah Lithium Iron Phosphate Battery With Low Temperature Protection

Loved the 300AH battery of for RV, so I purchased a 100AH for my trolling motor.
Both now are on the same iPhone app.

LiFePO4 12V 150Ah Lithium Iron Phosphate Battery With Bluetooth And Low-temperature Protection

LiFePO4 12V 100Ah Lithium Iron Phosphate Battery With Bluetooth And Low-temperature Protection

I live in a cabin tent all summer. Last year I added an Eco-Worthy 100 amp battery to my solar generator system. It works so well I’m adding a second battery and two solar panels to the system. I don’t think I will have to run the gas generator at all this year. Eco-Worthy is so economical and easy to set up I recommend it to anyone looking into solar power.

I ordered a set of 4 100 Ah 48v batteries with the included rack. The batteries are functioning great. I have them connected to an EG4 12000XP inverter. Communication was established with no issues. These are good batteries at a very reasonable price. I definitely recommend them.

This is a super nice kit for a great price. The packaging for my kit was exceptional ...nothing damaged and everything well insulated with foam in a double boxed containment. Having worked in industry for many years, I can say that packaging does not get any better than this. Everything inventoried correctly with one slight bit of confusion with hardware bag 10 as indicated in the very good assembly manual. It shows three M5x10mm Hex Socket Cap Bolts which are not in the bag and are not needed. One might assume they are needed to mount the Sunlight Sensor to the Sunlight Sensor Rack, but for this purpose two M5 Phillips Head Screws are bagged in the box with the controller, mounting brackets and and wire harnesses. No biggie! Everything needed was in the kit. Overall, a great job for the Eco Worthy team in packaging and providing all things necessary for assembling this kit.