How to Connect the Mobile App

How to Connect the Mobile App

September 11,2025

With the increasing intelligence of energy-storage batteries, more and more products support real-time monitoring and configuration via a mobile app. Using the app, users can quickly check battery status, identify faults, and perform basic parameter management without dismantling the device or connecting a PC.

I. Pre-Connection Checklist

I. Pre-Connection Checklist

Before linking the mobile app, ensure the following:

The battery supports Bluetooth or Wi-Fi communication.
Title

The official recommended app has been installed.
Title

The Bluetooth or Wi-Fi module is powered on and within 5 m of the phone.
Title

App permissions are granted: Bluetooth access and location services (for more accurate Bluetooth pairing).
Title

II. How to Connect the Mobile App

II. How to Connect the Mobile App

(Example: 48V 100 Ah Server Rack Battery)

👉Download the manual to learn more about how to use the EW App

33% Off
ECO - WORTHY Cubix 100 | 48V 100Ah Server Rack Battery | Bluetooth & WiFi | 10 Years Warranty | UL1973 | UL9540A | CEC - lithium battery - ECO - WORTHY

Eco-Worthy Cubix100 48V 100Ah Server Rack Battery | Bluetooth & WiFi | 10 Years Warranty | UL9540 | UL1973 | UL9540A | CEC Listed

$799.99
$1,049.99

(43 ratings)

(Buy Battery Get Free Monitor & Rack)

III. Core Features of the Mobile App

III. Core Features of the Mobile App

Most battery apps share a similar feature set; the common functions are as follows:

1.

Real-Time Dashboard

2.

Alarms & Protection Alerts

3.

Communication Protocol Selection

Ⅳ. Troubleshooting & Solutions

Ⅳ. Troubleshooting & Solutions

Q: Device not found or connection fails

A: Make sure Bluetooth is ON and the app has been granted location permission. Toggle Bluetooth off/on, then restart the app.

Q: Cell data is incomplete or the screen lags while refreshing

A: Unstable signal. Power-cycle the battery or restart the app, then move the phone closer to the battery (< 5 m) and reconnect.

……

…

The mobile app is a powerful extension of smart battery management, letting you check status anytime, anywhere. Compared with traditional PC-based tools, the app is more intuitive and faster—ideal for home users, DIY enthusiasts, and on-site commissioning engineers.

Subscribe

Get an Exclusive $10 Off Your First Purchase

Thanks for contacting us. We'll get back to you as soon as possible.

Main Article

Decoding the Multi-Dimensional Communication Capabilities of the ECO-WORTHY 48V100Ah Server Rack Battery

May 29,2025

Related Articles

How to Configure Master-Slave Communication Between Batteries

August 29,2025
Title

How to Use the Host PC Software

September 8,2025
Title

Which inverter brands are supported? What is closed-loop communication?

September 19,2025
Title

How to Configure the Battery for Closed-Loop Communication with an Inverter?

September 19,2025
Title

Closed-Loop vs. Open-Loop Communication

September 22,2025

Core Topic

The core theme of this article series is “Intelligent Battery Communication,” focusing on the communication functions and technologies of the 48V 100AH server rack battery and its related devices. It covers master-slave communication, upper computer communication, mobile APP communication, and inverter communication, aiming to help users understand and apply these technologies.
Title

💬 Leave a comment Now

Leave a comment

6 comments

Absolutely does not work on either batteries or the inverter. Scan fails, errors out, Bluetooth doesn’t work, wifi doesn’t work. USELESS. Troubleshooting is “in development”, contact us brings no reply. Will be returning over $2000 worth of wasted time to Amazon.

Darin Hoover

My 100ah LiFepo battery has lost bluetooth, surely there is an easier way to connect rather than draining the battery as this takes ages.

Austin Bishop

My 100ah 12v battery has lost bluetooth connection, having to drain this battery is going to take ages surely there should be another fix to sort out the loss of bluetooth.

Austin Bishop

When my phone scans for device it doesn’t find it. There is no bar code to scan on batteries. Just get no device found. What am I doing wrong.

Bill

I have purchased a ECO-WORTHY charger controller 40AMP. Connected to my solar set up but its only given me the basic setting ..the charge controller on the app not the same one as l all ready got ..do l have a problem

Adrian Marshall